Elton PS4 Controller Designer 3M Skin for Sony PlayStation 4…

51NhR7rIUTL51952ewRFfL518bdqlH fL
Price: ₹399.00 - ₹299.00
(as of May 22,2022 15:13:48 UTC – Details)

ISRHEWs

Elton Skin Kit for Sony PlayStation 4 Proctive is printed with super-high resolution graphics. Skins for PS4 games is easy install and removal. Remote controller will leave behind no games decals residue. skins decals for PS4 playstation 4 controller will prevent dust proof, waterproof, oil proof and fingerprints. Decals for play station 4 custom PS4 controllers will not Scratch, Fade (UV Resistant) or Peel. Stickers for ps4 custom controllers fit PlayStation 4 Controller (Controllers not included). Give your PS4 accessories a new and cool look. Install: 1) Clean the unit’s surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease. 2) Peel one piece of Decals from the paper liner. NOT to let the adhesive side touch anything. 3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface. 4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size. 5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time. 6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Package Contains: Skins for Play Station Dual shock 4 Controller . – Actual controllers not included.
TOP QUALITY VINYL SKINS – GameXcel protective vinyl skins are printed with super-high resolution graphics and ultra viscosity. There are premium triple layered protections, one with scratch resistant laminate, second is photo real digital print, the last layer is 3M patent air release vinyl. Adhesive leaves no residue.
TOP QUALITY – Full Color, “Anti-Slip” Grip-Like Vinyl System Protective “Sticker”. Custom PS4 controller skins will not Scratch, Fade (UV Resistant) or Peel. Installation – To install: 1. Clean PS4 accessories surface thoroughly 2. Put on each piece of vinyl decal carefully 3. Apply hot air to PS4 remote play decal surface for a best result by using a hair dryer or hot air gun.
Installation – To install: 1. Clean PS4 accessories surface thoroughly 2. Put on each piece of vinyl decal carefully 3. Apply hot air to PS4 remote play decal surface for a best result by using a hair dryer or hot air gun.
We use satin Matte or Gloss Finish Overlaminate on all our Controller Skins which further increase print life. of the product along with making it water-proof.,Anti -Glare & Anti-UV.Laminate also increases thickness of skin making it tougher against scratches and other wear & tear compared to skins without lamination. Report incorre

Leave a Reply